To maintain the appearance of the cubicle hardware, you must take into consideration cleaning, lubrication and periodic inspection.
Cleaning:
»
To keep the aesthetic look of the product, cleaning often and with the correct solution is essential.
»
The hardware should be cleaned frequently.
»
For anodised hardware use a mild anti-bacterial detergent and damp cloth.
»
For powder coated and polished hardware use a polish and non-abrasive cloth.
»
Do not use corrosive chemicals
Lubrication:
»
Lightly lubricate the indicator bolt mechanism every 6 months to ensure continuity of movement. Light lubrication of the hinges is also required to avoid the door sticking and deterioration of the riser.
Periodic Inspection:
»
Periodically inspect all fixings, adjust to secure as and when needed.
»
Ensure correct sized allen keys, screw drivers and drill bits are used.
»
Safety mechanisms must also be inspected frequently in case of vandalism.
»
If vandalism occurs the part should be replaced as soon as possible to avoid any accidents.
Fitting of 'T' Nuts:
»
When 'T' nuts are used they should be fitted securely but not too tight to allow movement of the laminate. As the material expands with moisture, pressure is put upon the 'T' nuts causing them to sheer off if they are fitted too tight.
»
Please use our enquiry form for more details about this service.
